A ceiling fan needs a fan-rated box, not a light box — that's the part most people find out the hard way. OSB installs and replaces fans throughout Humarock, including rooms that have never had a ceiling fixture at all.
“Bought an EV and had no idea what my panel could handle. They did the load calculation, told me straight that I had room, and installed the charger two days later.”
“We had knob-and-tube in the attic and our insurer was getting nervous. They rewired in stages so we never lost power for more than a few hours at a time.”
“Breaker had been tripping for months and two other companies just replaced parts. OSB traced it to a backstabbed outlet behind a bookcase in twenty minutes.”
Replacing a fan where a fan-rated box already exists is a quick flat-rate job. Adding a fan to a room with no fixture costs more because it needs a box, a switch leg and a cable run.
Yes. Sloped-ceiling adapters and the right downrod length keep the blades level and clear.
You do — a fan-rated box that carries the moving weight. A standard light box isn't built for it and is the most common thing we replace.
Yes, with a three-wire run or a remote/smart control if fishing a new cable isn't practical in your Humarock home.
We do, using damp or wet-rated fans on GFCI-protected exterior circuits.
Knob-and-tube and aluminium replacement
See serviceCKT 60ALevel 2 and Tesla Wall Connector
See serviceCKT 100AStandby and whole house backup
See serviceCKT 15ARecessed, outdoor, LED retrofit
See serviceCKT 20AGFCI, USB, dedicated circuits
See serviceCKT CAT6Automation, structured wiring, hubs
See serviceFlat pricing quoted before the work starts. Same-day and next-day slots available across Massachusetts.
Sizing, fuel, transfer switches, and the honest answer on whether you need whole-house coverage.
ReadGUIDESeven questions, and what a good answer to each sounds like.
ReadGUIDEThis is the one electrical symptom that should never wait until morning.
Read